Spray Pop-ups

Features and Specifications:

• High impact and corrosion resistant engineering plastic construction.

• Heavy duty SS retraction spring.

• Anti Drain Valve to avoid puddling.

• Ratchet mechanism to adjust the spray direction.

• Separate filter at nozzle inlet.

• Wiper seal with self flushing mechanism.

• SS Screw for fine tuning of radius.

• Uniform distribution profile.

• Operating pressure 2 kg/cm² (28.44 psi).

• Available in 2” & 4” popup height.

• ½” BSP female threaded bottom inlet.

• Available in full, half, quarter and three quarter circle spray patterns.

Applications:

• Recommended for landscape, turf and home gardens.

Technical Specifications:

Pattern	Pressure		Radius		Discharge		Precipitation Rate mm/hr
	kg/cm²	psi	m	ft	lpm	gpm	■	▲
	1.0	14.22	2.30	7.54	10.5	2.8	119	138
	1.5	21.33	2.50	8.20	12.7	3.4	122	142
	2.0	28.44	3.25	10.56	14.4	3.8	82	95
	2.5	35.55	3.75	12.30	15.2	4.0	65	75
	3.0	42.66	3.95	12.95	17.0	4.5	65	75
	1.0	14.22	2.30	7.54	7.4	2.0	84	98
	1.5	21.33	2.50	8.20	9.0	2.4	86	100
	2.0	28.44	3.25	10.56	10.2	2.7	58	67
	2.5	35.55	3.75	12.30	11.4	3.0	49	57
	3.0	42.66	3.95	12.95	12.4	3.3	48	55
	1.0	14.22	2.30	7.54	6.3	1.7	71	83
	1.5	21.33	2.50	8.20	7.7	2.0	74	86
	2.0	28.44	3.25	10.56	8.5	2.2	48	56
	2.5	35.55	3.75	12.30	9.5	2.5	41	47
	3.0	42.66	3.95	12.95	10.7	2.8	41	48
	1.0	14.22	2.30	7.54	3.9	1.0	44	51
	1.5	21.33	2.50	8.20	4.5	1.2	43	50
	2.0	28.44	3.25	10.56	5.2	1.4	30	34
	2.5	35.55	3.75	12.30	5.8	1.5	25	29
	3.0	42.66	3.95	12.95	6.6	1.8	25	30

Note: Test conducted in no wind & under standard test conditions.

Ordering Specifications:

Example: POP2QC - This code represents Spray Pop-ups having 2” pop-up height with quarter circle spray pattern.

Related Link :
Pop-up Accessories

Nozzle for Spray Pop-Ups